Product Information Sheet: Differential pressure tolerance for TEM and X-Ray Window membranes by thickness and size
All our membrane types and membrane area configurations have been robustness tested by application of differential pressure. In these tests, the membrane was oriented such that differential pressure forced the membrane against the chip frame. In the opposite orientation where the membrane would be delaminated from the chip frame, the pressure tolerance would be several times lower.
All values below are the maximum tolerated differential pressure reported as mean +/- standard deviation (n = 3), in units of PSI.
- 9 Windows: (8) 100×100, (1) 100×350 micron
- 9 Small Windows: (8) 50×50, (1) 50×350 micron
- 2 Slots: (2) 50×1500 micron
- Single Windows: (1) square window of x micronside-length